Wired (Ethernet) Installation 19
4. Select
Method 1: Connect via a router/access point (RECOMMENDED).
Important:
Do not select Method 2: Connect directly to the computer (ADVANCED) or
Method 3: Connect with WPS or SES (NOT SUPPORTED).
5. If you see a firewall alert message click Unblock or Allow to let Epson
EasyInstall continue. Do not select
Ask Me Later, Keep Blocking, or Block.
Note:
Make sure that you allow network access for Epson EasyInstall. In Windows, verify
that the publisher is SEIKO EPSON, then click Unblock. In Mac OS X, configure
your firewall software to allow network access for Epson EasyInstall.
To Next Page
Loading...
