Epson WorkForce 600 Series Network Installation Guide

2 Before You Begin
Before You Begin
Make sure you installed ink cartridges and loaded paper as described on the
Start Here poster. Then follow the instructions in this guide to set up the printer
for use on a network.
Tip:
For a video tutorial and other information about setting up a wireless network, go to:
epson.com/support/wireless
Do one of the following:
■ If you’re installing the printer for the first time, see below.
■ If you’re setting up an additional computer to use the printer on the network,
follow the steps in “Install on Additional Computers” on page 23.
Choose Your Connection Type
Wireless To add the printer to your wireless network, see page 3.
Wired To add the printer to your wired network, see page 15.

Epson WorkForce 600 Series Specifications

General

Brand	Epson
Model	WorkForce 600 Series
Category	All in One Printer
Language	English