Epson WorkForce 600 Series Network Installation Guide

4 Wireless Network Installation
2. Connect the other end to any available LAN port on your router, access point,
or hub.
If you don’t have access to an Ethernet port on your router, access point, or
hub, connect the printer directly to your computer’s Ethernet network port.
Note:
To use this configuration method, your computer must be connected to the
network wirelessly, and your computer’s Ethernet connection must be set to
obtain an IP address automatically.
3. Continue with the steps in the next section to install software.

Epson WorkForce 600 Series Specifications

General

Brand	Epson
Model	WorkForce 600 Series
Category	All in One Printer
Language	English