Epson WorkForce 600 Series Network Installation Guide

Wireless Network Installation 9
7. Select the printer you want to configure, then click
Next.
Note:
It may take up to 90 seconds for your computer to find the printer on the network.
If your printer doesn’t appear in the list after 90 seconds, make sure that the printer
is turned on and the Ethernet cable is connected as described on page 3. Then
click the refresh button.
8. Select Wireless (remove Ethernet cable when prompted) as the network
communication type, then click
Next.

Epson WorkForce 600 Series Specifications

General

Brand	Epson
Model	WorkForce 600 Series
Category	All in One Printer
Language	English