Network (wireless or wired)
See your Network Installation Guide.
You can’t install your software as
described below.
OR
USB connection
Make sure you have a USB cable (not included).
Then follow the steps below.
USB connection
Follow these steps to connect the WorkForce 600 Series directly to your
computer using a USB cable (not included).
Windows
1 Make sure the WorkForce 600 Series is
NOT CONNECTED to your computer.
Note: If you see a Found New Hardware
screen, click Cancel and disconnect the
USB cable. You can’t install your software
that way.
2 Insert the WorkForce 600 Series software CD.
With Windows Vista
®
, if you see the AutoPlay
window, click Run Epsetup.exe. When you see the
User Account Control screen, click Continue.
3 Click Install and follow the on-screen instructions.
To use the WorkForce 600 Series for faxing, connect the included phone cord
from a telephone wall jack to the LINE port on the WorkForce 600 Series. To
connect a telephone or answering machine, see the Quick Guide for instructions.
Note: If you’re connecting to a DSL phone line, you must use a DSL filter or you won’t
be able to fax. Contact your DSL provider for the necessary filter.
Connect the phone cord
6
7
Choose your connection
To Next Page
Loading...
