Epson WorkForce 840 - Page 7

Loading Paper 7
2. Slide the edge guides outward.
3. Position the guide shown below for the size of paper you’re using.
4. Load the paper against the edge guide with the glossy or printable side face
down. (Load letterhead or pre-printed paper with the top edge at the back of
the paper cassette.)
Note:
Make sure the paper is loaded against the edge guide and not sticking out from the
end of the cassette.
LT R
Letter- or A4-size
4 × 6-inch
(10 × 15 cm)
in cassette 1 only
4 × 6-inch
(10 × 15 cm)
in cassette 1 only
Letter- or A4-size