Epson WorkForce ES-500W II - Network Specifications; Using Port for the Scanner

Network Specications
Wi-Fi Specications
Standards IEEE802.11b/g/n
Frequency Range 2.4 GHz
Maximum Radio-Frequency Power Transmitted 20 dBm (EIRP)
Connection Modes
Infrastructure mode, Ad hoc mode
*1
, AP mode
*2 *3
Wireless Security
WEP (64/128bit), WPA2-PSK (AES)
*4
, WPA2-Enterprise
*5
, WPA3-SAE,
WPA3-Enterprise
*1 Not supported for IEEE802.11n.
*2 Not supported for IEEE802.11b.
*3 AP mode connection and Wi-Fi connection can be used at the same time.
*4 Complies with WPA2 standards with support for WPA/WPA2 Personal.
*5 Complies with WPA2 standards with support for WPA/WPA2 Enterprise.
Network Function List
Functions Supported
Panel Operation Restore the Factory Default Settings ✓
Network Scanning Epson Scan 2 IPv4, IPv6 ✓
Epson ScanSmart IPv4 ✓
Security Protocol
SSL/TLS HTTPS (Server/Client), SMTPS (Client), STARTTLS, Root certicate
(Client), Root
certicate
updating (Client), CA-signed
certicate
(Server), CA certicate (Server), CSR generation (Server), Self-signed
certicate (Server), EC key CSR/self-signed certicate generation
(Server),
Certicates/Secret
key imports (Server)
Authentication for Email sending POP before SMTP, APOP, SMTP Authentication
MIB accessing Authentication/Encryption SNMPv3
Using Port for the Scanner
e scanner uses the following port. ese ports should be allowed to become available by the network
administrator as necessary.
Technical Specications > Using Port for the Scanner
167