Epson WorkForce ES-500W II - Information on Applications

Indicators Situation Solutions
On
On
On
On
O
On
On
The scanner has started in recovery
mode because the
rmware
update
failed.
Follow the steps below to try to up-
date the
rmware
again.
1. Connect the computer and the scan-
ner with a USB cable. (During recovery
mode, you cannot update the rm-
ware over a network connection.)
2. Visit your local Epson website for fur-
ther instructions.
Network connection errors
Indicators Situation Solutions
Flashing slowly
On
An access point settings error has oc-
curred.
Press the
button to release the er-
ror, and then restart the devices you
want to connect to the network. Re-
connect to the network.
Flashing slowly
Flashing slowly
An access point settings error has oc-
curred (a security error).
Flashing slowly (white)
Flashing slowly
A network connection error has occur-
red (the Date and Time has not been
set correctly)
Re-set the Date and Time in Web Con-
g.
Related Information
& “Application for Conguring Scanner Operations (Web Cong)” on page 24
& “Removing Jammed Originals from the Scanner” on page 107
& “Connecting the Scanner to the Network” on page 65
Information on Applications
is section introduces the application products available for your scanner. e latest application can be installed
at the Epson Web site.
Application for Scanning from a Computer (Epson ScanSmart)
is application allows you to scan documents easily, and then save the scanned images in simple steps.
See the Epson ScanSmart help for details on using the features.
Starting on Windows
❏ Windows 10
Click the start button, and then select Epson
Soware
> Epson ScanSmart.
Scanner Basics > Information on Applications > Application for Scanning from a Computer (Epson ScanSmart)
23