EasyManua.ls Logo

Epson WorkForce ES-500W II - Envelopes

Epson WorkForce ES-500W II
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note:
You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times.
If you cannot nd an appropriate size for the original you want to scan in the Document Size list in Epson Scan 2,
select Auto Detect or select Customize to create a custom document size.
When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting, the image is automatically
scanned by applying Paper Skew in the Correct Document Skew setting.
Do not leave photos inside the Carrier Sheet for a long time.
Only use the Carrier Sheet designed for your scanner. e Carrier Sheet is automatically recognized by the scanner
by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered.
Related Information
& “Carrier Sheet Codes” on page 27
& “Required Settings for Special Originals in Epson Scan 2 Window” on page 72
Envelopes
Specications of Envelopes
e
specication
of envelopes you can load into the scanner.
Size Measurement Thickness Loading Capacity
C6 114×162 mm (4.49×6.38 in.)
(standard size)
0.38 mm (0.015 in.) or less 5 envelopes
DL 110×220 mm (4.33×8.66 in.)
(standard size)
Specications of Originals and Placing Originals
>
Placing Originals
>
Envelopes
57

Table of Contents

Related product manuals