Epson WorkForce ES-500W II - Setting the Document Protection Feature

Setting the Document Protection Feature
To reduce damage to the document, scanning stops immediately when the following conditions are detected.
❏ A paper feed error has occurred
❏ A document is fed at an angle
e default setting is On-Medium.
c
Important:
❏
is
feature does not prevent all documents from being damaged.
❏ Paper feed errors may not be detected depending on the paper feeding conditions.
1.
Start Epson Scan 2 Utility.
❏ Windows 10
Click the start button, and then select EPSON - Epson Scan 2 Utility.
❏ Windows 8.1/Windows 8
Enter the soware name in the search charm, and then select the icon displayed.
❏ Windows 7/Windows Vista/Windows XP
Click the start button, and then select All Programs or Programs - EPSON - Epson Scan 2 - Epson Scan 2
Utility.
❏ Mac OS
Select Go - Applications - Epson
Soware
- Epson Scan 2 Utility.
2.
Make the following settings on the Scanner Setting tab.
Set Paper Protection to On-Low, On-Medium or On-High.
To enable this feature, select the level of detection you want to use. See the following table for details on each
level.
Level Description
On-Low Lower the sensitivity to detect the skew of the originals.
On-Medium
Detect the skew of the stapled originals and the skew that On-Low could not
detect.
Useful Features > Setting the Document Protection Feature
78