Epson WorkForce ES-500W II - Page 74

4.
Select Automatic Feeding Mode on the Main Settings tab.
5.
Make other settings for scanning on the Epson Scan 2 window.
Note:
You can make timeout settings to
nish
Automatic Feeding Mode.
Select Settings on the Document Source list to open the Document Source Settings window. Set Automatic Feeding
Mode Timeout (seconds) on the window.
6.
Click Save to close the Epson Scan 2 window.
7.
Click Close to close the Settings window.
8.
Click Scan double-sided or Scan single-sided.
Automatic Feeding Mode starts.
9.
Adjust the edge guides, and then place the original in the ADF.
Scanning starts automatically.
Scanning > Scanning from a Computer > Scanning Dierent Sizes or Types of Originals One by One Continuously (Au …
74