Epson WorkForce Pro WF-M5190DW User Manual

Ink Cartridge Codes
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink. e use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
e following are the codes for genuine Epson ink cartridges.
Black: T8651, T8661
Note:
❏ Not all cartridges are available in all regions.
❏ For information on Epson's ink cartridge yields, visit the following website.
http://www.epson.eu/pageyield
Ink Cartridge Handling Precautions
Read the following instructions before replacing ink cartridges.
Handling precautions
❏ Store ink cartridges at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink cartridge before the date printed on the package.
❏ For best results, use up ink cartridge within six months of installation.
❏
Aer
bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least three hours before using it.
❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.
❏ Do not move the print head by hand; otherwise, you may damage the printer.
❏ Do not turn o the printer during ink charging. If the ink charging is incomplete, you may not be able to print.
❏ Do not leave the printer with the ink cartridge removed; otherwise, ink remaining in the print head nozzles may
dry out and you may not be able to print.
❏ If you need to remove an ink cartridge temporarily, make sure you protect the ink supply area from dirt and
dust. Store the ink cartridge in the same environment as the printer. Because the ink supply port is equipped
with a valve designed to contain the release of excess ink, there is no need to supply your own covers or plugs.
User's Guide
Replacing Ink Cartridges and Other Consumables
57

Epson WorkForce Pro WF-M5190DW Specifications

General

Color	No
Duplex printing	Yes
Printing colors	Black
Maximum duty cycle	35000 pages per month
Number of print cartridges	1
Maximum resolution	2400 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Paper input type	Paper tray
Total input capacity	330 sheets
Total output capacity	150 sheets
Total number of input trays	2
Envelopes sizes	10, C4, C6
Paper tray media types	Plain paper
Paper tray media weight	64 - 256 g/m²
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
ISO C-series sizes (C0...C9)	C4, C6
Maximum ISO A-series paper size	A4
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.4 W
Power consumption (standby)	2.3 W
Power consumption (printing)	25 W
Display	LCD
Product color	Grey, White
Country of origin	Indonesia
Market positioning	Business
Pallet width	800 mm
Pallet height	2090 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	8 pc(s)
Quantity per pallet layer	2 pc(s)
Package depth	615 mm
Package width	523 mm
Package height	485 mm
Package weight	14358 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	422 mm
Width	461 mm
Height	284 mm