301
Adjusting Print Quality
If your print quality declines, you may need to run a utility to clean or align the print head.
Note: When using the Epson Universal Print Driver or PostScript (PS3) printer software with the product,
you can clean and align the print head and run a nozzle check by using the printer buttons or the utilities
included with the standard Epson printer software. To download the standard Epson printer software, go
to epson.com/support/wfr5690.
If running these utilities does not solve the problem, you may need to replace the ink packs.
Print Head Maintenance
Print Head Alignment
Cleaning the Paper Guide
Print Head Maintenance
If your printouts become too light, or you see dark or light bands across them, you may need to clean the
print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You can check for clogged nozzles before you clean them so you don’t clean them unnecessarily.
Note: You cannot clean the print head if ink is expended, and may not be able to clean it when ink is low.
You must replace the ink pack first.
Print Head Nozzle Check
Print Head Cleaning
Parent topic: Adjusting Print Quality
Related topics
Replacing Ink Supply Units (Ink Packs) and Maintenance Boxes
Print Head Nozzle Check
You can print a nozzle check pattern to check for clogged nozzles.
Checking the Nozzles Using the Product Control Panel
Checking the Nozzles Using a Computer Utility
Parent topic: Print Head Maintenance
To Next Page
Loading...
