5. Select your product from the list of network printers and click Next. Do not select any product with
(WSD) in its name.
Note: If your product does not appear on the list, make sure it is turned on and connected to your
network, and click Search again.
6. Click Have disk.
You see this window:
7. Click Browse.
8. Locate and open the folder you unzipped in a previous step.
9. Do one of the following:
• If you are installing the PCL printer software, select EPUP6SETUP.inf and click OK.
• If you are installing the PS3 printer software, select eppsnt.inf and click OK.
You see a window like this:
20
To Next Page
Loading...
Need help?
General