4. Insert paper, glossy or printable side up and short edge first, in the center of the tray. If you are
inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges.
Caution: To prevent paper feeding problems, make sure you do not load too much paper in the tray.
5. Slide the edge guides against the paper, but not too tightly.
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first, no matter which way your document faces.
• Load letterhead or pre-printed paper top edge first.
• Do not load paper above the arrow mark inside the edge guides.
• Check the paper package for any additional loading instructions.
35
To Next Page
Loading...
Need help?
General