C
Carefully remove the jammed paper.
D
Open the Automatic Document Feeder (ADF).
E
Remove all of the paper inside, including any
torn pieces.
F
Close the Automatic Document Feeder (ADF).
G
Raise the ADF input tray.
H
Carefully remove the jammed paper.
I
Return the ADF input tray to its original
position, and close the ADF cover.
Print Quality Help
If you see banding (light lines), missing colors, or any
other quality problems in your printouts, try the
following solutions.
❏ Make sure you have loaded the paper and place your
original correctly.
& “Loading Paper” on page 5
& “Placing Originals” on page 7
❏ Check the paper size settings and the paper type
settings.
& “Selecting Paper” on page 5
English
Basic Guide
Basic Troubleshooting
19
To Next Page
Loading...
