Epson WorkForce WF-7835DTWF - Page 275

Related Information
& “Check Fax Connection” on page 275
& “Fax Setting Wizard” on page 275
& “Basic Settings” on page 275
& “Send Settings” on page 277
& “Receive Settings” on page 278
& “Report Settings” on page 280
& “Security Settings” on page 281
Check Fax Connection
You can nd the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Check Fax Connection
Note:
You cannot display this menu on the Web Cong screen.
Selecting Check Fax Connection checks that the printer is connected to the phone line and ready for fax
transmission. You can print the check result on A4 size plain paper.
Fax Setting Wizard
You can nd the menu on the printer's control panel below:
Settings > General Settings > Fax Settings > Fax Setting Wizard
Note:
You cannot display this menu on the Web Cong screen.
Selecting Fax Setting Wizard makes basic fax settings. Follow the on-screen instructions.
Related Information
& “Basic Settings” on page 275
& “Making the Printer Ready to Send and Receive Faxes” on page 341
Basic Settings
You can nd the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Basic Settings
Note:
On the Web Cong screen, you can nd the menu below.
Fax tab > Basic Settings
Fax Speed:
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
Product Information > Settings Menu List > General Settings
275