151
Cleaning and Transporting Your Product
See these sections if you need to clean or transport your product.
Cleaning Your Product
Cleaning the Paper Rollers
Cleaning the Print Head Path
Transporting Your Product
Cleaning Your Product
To keep your product working at its best, you should clean it several times a year.
Close the output tray, front cover, and rear paper feed cover when you are not using the product to
protect it from dust.
Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
Do not use oil or other lubricants inside the product or let water get inside it.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
4. Remove all the paper.
5. Clean the outer case and control panel with a soft, dry cloth. Do not use liquid or chemical cleansers.
Parent topic: Cleaning and Transporting Your Product
Cleaning the Paper Rollers
If you encounter issues with paper feeding properly from the cassette, clean the paper rollers inside your
product.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
To Next Page
Loading...
