EasyManua.ls Logo

Epson XP-344 Series

Epson XP-344 Series
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Try to use genuine Epson ink cartridges. is product is designed to adjust colors based on the use of genuine
Epson ink cartridges.
e
use of non-genuine ink cartridges may cause print quality to decline.
Epson recommends using the ink cartridge before the date printed on the package.
For best results, use up ink cartridge within six months of opening the package.
Related Information
& “Available Paper and Capacities” on page 34
& “List of Paper Types” on page 35
&
“Paper Handling Precautions” on page 33
&
“Checking and Cleaning the Print Head” on page 92
& “Aligning the Print Head” on page 93
Paper Is Smeared or Scued
When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the correct
direction and slide the edge guides to the edges of the paper.
When vertical banding appears or the paper is smeared, clean the paper path.
Place the paper on a at surface to check if it is curled. If it is, atten it.
When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 35
& “Cleaning the Paper Path” on page 95
Printed Photos are Sticky
You may be printing on the wrong side of the photo paper. Make sure you are printing on the printable side.
When printing on the wrong side of the photo paper, you need to clean the paper path.
User's Guide
Solving Problems
131

Table of Contents

Related product manuals