Epson XP-344 Series

Related Information
& “Loading Paper in the Rear Paper Feed” on page 35
Cleaning the Scanner Glass
When the copies or scanned images are smeared or scued, clean the scanner glass.
c
Important:
Never use alcohol or thinner to clean the printer.
ese
chemicals can damage the printer.
1. Open the document cover.
2. Use a so, dry, clean cloth to clean the surface of the scanner glass.
Note:
❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner
and a so cloth to remove it. Wipe o all remaining liquid.
❏ Do not press the glass surface too hard.
❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
Saving Power - Control Panel
1. Enter Setup from the home screen using the l or r button, and then press the OK button.
2. Select Printer Setup using the
l or r button, and then press the OK button.
3. Select Power
O
Timer or Sleep Timer using the
l or r button, and then press the OK button.
User's Guide
Maintaining the Printer
96