Epson XP-630 series - Copying; Copying Basics

Copying
Copying Basics
1. Load paper in the printer.
c
Important:
Make the paper settings on the control panel.
2. Place the originals.
3. Enter Copy from the home screen using the
l or r button, and then press the OK button.
4. Set the number of copies using the – or + button.
5. Select color copy or monochrome copy using the
l or r button.
6.
Select Paper and Copy Settings using the
d button, and then press the OK button. Check the settings such as
the paper size and the paper type and change the settings if necessary. Select the setting items using the
u or
d button and change the settings using the l or r button.
Note:
If you want to copy by reducing or enlarging the size of a document by a specic percentage, select Custom Size as the
Reduce/Enlarge setting, and then specify a percentage using the – or + button. You can change the percentage in
increments of 5% by pressing and holding down the – or + button.
7. Press the x button.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 22
& “Loading Paper in the Paper Cassette 2” on page 26
& “Placing Originals on the Scanner Glass” on page 31
& “Menu Options for Copy Mode” on page 76
Menu Options for Copy Mode
Note:
Available menus vary depending on the layout you selected.
The number of copies
Enter the number of copies.
Color
Copies the original in color.
User's Guide
Copying
76