Eqiva UT300 - Maintenance and Cleaning

28
Maintenance and cleaning
If the temperature exceeds the switch-o temperature (e.g.
22 °C) the heang device will be switched o.
Cooling
If you want the universal thermostat to work in cooling
mode, please select a lower temperature for the switch-o
temperature than for the switch-on temperature.
Example:
Switch-on temperature 22 °C
Switch-o temperature 17 °C
If the temperature exceeds the switch-on temperature (e.g.
22 °C) the cooling device will be switched on.
If the temperature falls below the switch-o temperature
(e.g. 17 °C) the cooling device will be switched o.
6 Maintenance and cleaning
The product does not require you to carry out any
maintenance. Enlist the help of an expert to carry
out any maintenance or repairs.
Disconnect the device from the power supply
system before commencing cleaning.