Eqiva UT300 - Technical Specifications

29
Technical specicaons
Clean the product using a so, lint-free cloth that is clean
and dry. You may dampen the cloth a lile with lukewarm
water in order to remove more stubborn marks. Make sure
that no moisture will ingress into the housing. Do not use
any detergents containing solvents, as they could corrode
the plasc housing and label.
7 Technical specicaons
Device short descripon: UT300
Type of applicaon: thermostat
Temperature sensor: external
(2 m connecng cable)
Sensor temperature range: -40 to +99 °C
Operang mode: heang or cooling operaon
(switch-on and switch-o
temperature can be adjusted
separately)
Method of operaon: type 1.B
Supply voltage: 230 V/50 Hz
Current consumpon: 16 A max.
Standby power
consumpon: 1.3 W
Degree of protecon: IP20
Maximum switching capacity: 3,680 W
Kind of load: ohmic load