28
7. After the monitor has determine your blood pressure and
pulse rate, the cuff automatically deflates. Your systolic rate,
diastolic rate, pulse rate and corresponding Risk Category
Indicator and Irregular Heartbeat Detector (if any) are
displayed with date and time for 1 minute and save results
to memory automatically.
*Note
！
1. Do not inflate the cuff until it is wrapped around your upper arm.
2. Without any operation for 1 minute, device turns to the sleeping mode.
3. To stop measurement, press button.
4. Press M key to memory mode.
5. Press key to Date/ Time Setting Mode.
6. Press to Change User.
7. Press key to stop measurement to Sleeping Mode.
Measurement Procedure
To Next Page
Loading...
