To Next PageTo Next PageWhat to do if my EQUATION COOL 7K 2 is not cooling?
If your EQUATION Air Conditioner isn't cooling the room, first ensure that the 'Cooling mode' is enabled. Next, check for good air circulation at both the inlet and outlet. Also, verify that the filter is clean and not blocked. Confirm that the setpoint temperature is lower than the current room temperature, and make sure all doors and windows are properly closed.
General| Brand | EQUATION |
|---|---|
| Model | COOL 7K 2 |
| Category | Air Conditioner |
| Language | English |
Connect the exhaust duct to the appliance for cooling or dehumidification mode.
Steps to insert batteries into the remote control compartment.
Details of the buttons and displays on the appliance's control panel.
Explanation of the buttons and features of the remote control.
Instructions for operating the appliance in cooling and fan modes.
Instructions for operating the appliance in dehumidification mode.
How to set the timer for automatic start or stop of the appliance.
Details on using the sleep function and turning the display on/off.
Manually adjust the horizontal and vertical deflectors for airflow.
Instructions for cleaning the appliance's dust filters monthly.
How to clean the exterior surfaces of the appliance with a cloth.
