EasyManua.ls Logo

Equipter RB4000 - General Information; Safety Precaution Definitions; Precautions

Equipter RB4000
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The purpose of this manual is to provide safe operating and maintenance procedures for the intended
use of this machine. It is important that all information in this manual is READ and UNDERSTOOD before
operating the Equipter.
Since the manufacturer has no direct control over machine application and operation, it is the responsibil-
ity of the operator to conform to good safety practices in the implementation of this machine.
This section is composed of various warnings and safety tips which must be followed.
GENERAL INFORMATION
Dangers, Warnings, Cautions, and Notes are strategically placed throughout this manual to further
emphasize the importance of 750 kv to 1000 kv50 kv to 750 kv350 kv to 500 kv200 kv to 350 kv50 kv
to 200 kv300 volts to 50 kv0 volts to 300 voltsThese precautions supplement and/or complement the
safety information decals affixed to the unit and include headings that are defined as follows:
SAFETY PRECAUTION DEFINITIONS
Notes are also found in this manual.
NOTE: Provides information which may be of special interest.
4
The primary responsibility for safety with the equipment falls to the operator. It is the skill, care, common
sense, and good judgement of the operator that determines how efficiently and safely the job is
performed. Know the equipment before you start. Know the capabilities, dimensions, and how to operate
all the controls. Visually inspect the equipment before starting and never operate equipment that is not in
proper working order with all safety devices in place and operating.
PRECAUTIONS
Modification of the equipment, including
removal or modification of safety and
identification decals, without the written
consent of the manufacturer is a safety
violation and is strictly prohibited.
This machine is not insulated and does
not provide protection from contact with
or proximity to an electrically charged
conductor.
Indicates a potentially hazardous situation or
practice which, if not avoided, could result in
death or serious injury.
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Indicates potentially hazardous situation or
practice which, if not avoided, will result in
damage to equipment and/or minor injury.

Table of Contents

Other manuals for Equipter RB4000