Trailer Disconnect
Engage parking brake
Start engine and turn on fuel
Disconnect coupler, light plug and break-away switch
Lower front wheels and ensure they are in locked position
Slightly engage the reverse drive lever to ensure the hydraulic motor has engaged the rear
axle for job site use
Disconnect safety chains
General Driving
Disengage parking brake
Dump box must be in transport position
Drive forward or reverse with the drive lever
Steer using the marked lever
When not moving equipment, engage parking brake
Dump Box Operation
Park Equipter on firm, level surface
Level equipment with outriggers before raising or extending the dump box.
Open lids
Move dump box into desired position with appropriate levers
Keep all outriggers firmly on ground until box is in transport position
Never adjust outriggers while dump box is not in transport position
Parking
Always engage parking brake
Always park Equipter on firm, level surface. If surface is smooth, block wheels to prevent
unexpected movement.
38
To Next Page
Loading...
