MODEL 40001
OPERATING MANUAL
To operate the clock: To power on the clock, hold the POWER/DST SET button for 2 seconds, the correct
time, month, and date (e.g. “12 31” means Dec 31) will be displayed. The clock will automatically
indicate the AM/PM time.
Select the time zone: Slide the TIME ZONE switch (inside battery compartment) to display the time in
the desired time zone. The default time zone is Eastern Standard Time (EST).
Select Daylight-saving Time (DST): The clock is set at the DST Auto (don) position as the default. This
setting is correct unless you are in Arizona or parts of Indiana. Press the DST SET button once will show
the current setting. To change the DST status, press the DST SET button again, this will toggle between
“don” (DST is ON) or “doF” (DST is OFF). In a few seconds the time will be displayed.
To Next Page
Need help?
General
