Instruction manual for installation and operation of automatic pellet burner “ERATO GP20+”
(Version : 02.02.2010 10:36) p. 3/50
Table of contents
Page
1. Automatic pellet burner “ERATO GP20+” – description and
advantages............................................................................................................5
The burner could utilize following types of fuel ...........................................5
The unit is equipped with................................................................................5
The burner is equipped with...........................................................................6
Advantages of the burner................................................................................6
2. Automatic pellet burner “ERATO GP 20+” technical data ....................8
Table 2.1 Thermal and technical data of automatic pellet burner “ERATO
GP20+”, utilizing wood pellets..........................................................................8
Table 2.2 Dimensions and technical data of automatic pellet burner “ERATO
GP20+” ..............................................................................................................9
Table 2.3 Recommended solid biomass fuel properties – wood pellets...........9
Table 2.4. Pellets classification, considering their physical properties ..........10
3. Description of the construction of automatic pellet burner “ERATO
GP20+” ...............................................................................................................11
3.1. Main properties....................................................................................11
3.2. Specific design measures in order to increase the safety operation of
the burner .......................................................................................................14
4. Installation of automatic pellet burner.....................................................15
4.1. Some basic requirements for correct installation of automatic pellet
burner “ERATO GP20+” are.......................................................................15
4.2. Installation of the burner....................................................................15
4.3. Overall and attachment dimensions of the burner’s main unit......16
4.4. Arrangement and installation of the pellet burner’s modules........18
5. Initial steps and starting of pellet burner “ERATO GP20+” ................20
5.1. Basic fuel requirements.......................................................................20
5.2. Staring automatic pellet burner “ERATO GP 20+”........................20
5.2.1. Interface control board of automatic pellet burner “ERATO
GP20+” ........................................................................................................21
5.2.2. Automatic pellet burner power supply.......................................21
5.2.3. Switching on the burner...............................................................22
5.2.4. Burner’s operating algorithm .....................................................24
5.2.5. Operating control parameters of the burner.............................26
• Description of LED indication (positioned on the control board of
the unit): ......................................................................................................26
Table 5.1. Description of the operating parameters of the burner’s control
board.................................................................................................................28
5.2.6. Adjustment process of the burner, according to the heat
demand of a consumer ...............................................................................30
To Next Page
Loading...