Erbauer EAPS600 - Repair; Transportation

7 AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip
Outer sleeve
rmly clamped
Connect
Blue to
N(Neutral)
WARNING! Never connect live or neutral wires to the earth terminal
of the plug, which is marked with E.
Only t an approved 13 Amp BS 1363 or BS 1363/A plug and the correctly rated fuse.
If in doubt, consult a qualied electrician.
NOTE: If a moulded plug is tted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed to
prevent engaging into a socket.
Repair
Check for any damage and wear. Repair damages in accordance with this instruction
manual or take it to an authorised service centre before using the product again.
This product does not contain any parts that can be repaired by the consumer. Contact
an authorised service centre or a similarly qualied person to have it checked and
repaired.
Transportation
1. Switch the product off and disconnect it from the power supply.
2. Perform the pressure release procedure.
3. Always lock the trigger (15).
4. Always carry the product by its carry handle (1).
5. Protect the product from any heavy impact or strong vibrations which may occur
during transportation.
MNL_Erbauer_GB_EAPS600_600W Airless Paint Sprayer_V1_201029.indd 42 10/29/20 3:31 PM
43