6. Secure the product to prevent it from slipping or falling over, damage and injury.
Storage
1. Switch the product off and disconnect it from the power supply.
2. Perform the pressure release procedure and follow the cleaning procedure for long
term storage.
3. Arrange and store the disassembled prime tube (6), suction tube (7), spray hose
(10) and spray gun (14) properly in a suitable compartment.
4. Always lock the trigger (15).
5. Coil the spray hose (10) to prevent damage.
6. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
7. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10°C and 30°C.
8. We recommend using the original package for storage or covering the product with
a suitable cloth or enclosure to protect it against dust.
Troubleshooting
Suspected malfunctions are often due to causes that the users can x themselves.
Therefore check the product using this section. In most cases the problem can be
solved quickly.
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualied specialist if you
cannot solve the problem yourself!
MNL_Erbauer_GB_EAPS600_600W Airless Paint Sprayer_V1_201029.indd 43 10/29/20 3:31 PM
44
To Next Page
Loading...
