18
Use
Intended use
The product is intended for cutting wood logs and limbs. It must not be used for cutting
other materials, such as plastic, stone, metal, wood that contains foreign objects,
or materials that are harmful to health. This product should not be used outside of
domestic premises e.g. for felling trees or lumber work in forested areas.
The product may only be used with the guide bar/saw chain combination stated within
these instructions. The use of other types or sizes is not allowed. With this product
vertical and horizontal cuts can be performed. Longitudinal sections may only be cut
by professionals.
operation and to observe all the instructions therein. This product is intended for
private domestic use only, not for any commercial use. It must not be used for any
purposes other than those described.
Before you start
01
Protection
Controls
01
Hold the chain saw as in working condition. To start the machine, press the lock-off
button (8) and then press the switch trigger (10) and keep it pressed.
To switch off the machine, release the On/Off switch.
02
The kickback brake is a safety mechanism activated through the front hand guard (6)
when kickback occurs. The saw chain stops immediately.
To Next Page
Loading...
