28
WARNING! The vibration emission value during actual use of the tool
can differ from the declared value depending on the ways in which the
tool is used. Identify safety measures to protect the operator that are
based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
Depending on the actual use of the product the vibration values can
differ from the declared total. Adopt proper measures to protect yourself
against vibration exposures. Take the whole work process including times
the product is running under no load or switched off into consideration.
Proper measures include among others regular maintenance and care of
the product and accessories, keeping hands warm, periodical breaks and
proper planning of work processes.
Rating label explanation
ECSG18-Li = Model number ECSG3640-Li = Model number
E = Erbauer
CSG = Chain Saw
3640 = 36/40 V d.c.
Li = Lithium Ion
E = Erbauer
CSG = Chain Saw
18 = 18 V d.c.
Li = Lithium Ion
02
SYMBOLS
the following symbols and abbreviations. Familiarize yourself with them to reduce
hazards like personal injuries and damage to property.
Always wear eye protection. Always wear ear protection.
Wear a dust mask. Wear protective gloves.
Wear safety helmet Wear face protection
Wear safety footwear Correct direction of cutting teeth
Lock / to tighten or secure. Unlock / to loosen.
Note / Remark. Caution / Warning.
dB(A) Decibel (A-rated) n
0
No-load speed
To Next Page
Loading...
