Erbauer ERB561SRG - SPRAY ANGLE ADJUSTMENT; Spray Nozzle and O-ring Adjustment; Spray Pattern Selection

700W HVLP SPRAY GUN ERBAUER
1. Loose n the O-ring (23) by turning it
anticlockwise and release the spray
nozzle (22) and the O-ring (23) from
the spray head (20) (Fig. 8).
2. Set up the direction of the paint steam
to the desired position by aligning the
grooves (22a) of the spray nozzle (22)
with the spigots (20a) of the spray
head (20) (Fig. 9, 10).
3. Tighten the O-ring (23) clockwise to
secure the spray nozzle (22) with the
spray head (20).
SPRAY ANGLE ADJUSTMENT
22
23
20
Fig. 8
Fig. 9
22a
20a
Fig. 10
Vertical Jet Horizontal Jet Round Jet