© Erbe Elektromedizin GmbH Contacts worldwide: see erbe-med.com
Optional operating steps
As an example, the following settings are displayed in OPEN mode.
When setting the LAP mode, follow the same procedure.
The OPEN suction is the suction capacity while you activate the IES 3.
After deactivating the IES 3, you can leave the OPEN suction running
for a specified time. This period of time is the OPEN suction shut-off
delay.
During work breaks, you can leave the IES 3 to operate at reduced
capacity suction. This period of time is the standby suction time. First
of all, set the suction capacity for the standby suction time.
7 Accessing OPEN settings
8 Setting OPEN suction
9 Setting OPEN suction shut-off delay
10 Setting standby suction
11 Setting standby suction time
To Previous Page
Loading...
