Cleaning and maintenance
04/2011 1008775-02 Operating instructions – 35
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
– Remove rings, watches, bracelets etc. before starting cleaning work.
5.4 Lamps
y UV low pressure lamps can be cleaned with a damp cloth and without
additional cleaning agents where necessary.
5.5 Cleaning plan
To Next Page
Loading...
Need help?
General
