Cleaning and maintenance
36
Component Interval Activity See
page
After each tanning
session
When necessary
1 Entry area X Cleaning and disinfection 34
2 Foot mat (Plastic) /
Mirror
X Cleaning and disinfection 34
3 Control panel X Cleaning and disinfection 34
4 Holding bars X Cleaning and disinfection 34
Protective goggles X Cleaning and disinfection 34
MP3 cable X Cleaning and disinfection 34
5 Acrylic glass panels X Cleaning 34
6 Surfaces X Cleaning 34
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.6 Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see ‘Voreinstellungen/Presettings’, Order-No. 1008953-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
To Next Page
Loading...
