Cleaning and maintenance
38/58
4.5 Cleaning plan
Component Interval Activity
See page
After each
tanning session
When necessary
1 Entry area X Cleaning and disinfection 36
2 Foot mat (plastic) / mirror X Cleaning and disinfection 36
3 Control panel X Cleaning and disinfection 36
4 Holding bars X Cleaning and disinfection 36
Protective goggles X Cleaning and disinfection 36
AUX cable X Cleaning and disinfection 36
5 Acrylic glass panels X Cleaning 37
6 Surfaces X Cleaning 37
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
To Next Page
Loading...
Need help?
General
