Cleaning and maintenance
02/2021 1026110-00 Operating instructions – 41/58
Maintenance performed by authorized, trained and qualified staff
Danger to persons from maintenance work that has not
been carried out!
If maintenance work is not carried ou
t, it can lead to material
damage or personal injuries!
–
Maintenance work may only be carried out by personnel
who have been authorized, trained and qualified by JK
Products & Services, Inc.!
– The operator is responsible for compliance with the
maintenance intervals!
The maintenance work must be carried out in accordance with checklist
1019858-.. by a JK Factory Certified Technician at the manufacturer or by
personnel who have been authorized, trained and qualified by the manufac-
turer.
The correctly carried out maintenance work must be entered and confirmed in
checklist 1019858-..
The maintenance work must be carried out at the following intervals:
Annually or every 2000 hours, whichever is sooner.
Every 3000 hours
Every 5000 hours
After 10 years or 20,000 hours, whichever is sooner.
Once the age of the device reaches ten (10) years from the date of manufac-
ture, its condition must be assessed by a JK-International GmbH, Division JK-
Global Service Certified Technician before use of the device can be contin-
ued.
Failure to have this device assessment performed may result in personal
injury or property damage.
Any liability is excluded if use of the device continues ten (10) years after the
date of manufacture, without the "condition assessment" having been per-
formed.
To Next Page
Loading...
Need help?
General
