2
IN-HOME USE AND HOSPITAL STANDARDS
Ergomotion adjustable bed bases are designed solely for in-home use. This base was
not designed as a hospital bed and is not designed to meet hospital standards. Do not
use this base with TENT TYPE oxygen therapy equipment or near explosive gases.
ADDITIONAL SAFETY FEATURES
Casters (optional leg accessory) are equipped with locking wheels to prevent
unwanted movement. Even when locked and unable to roll, it is possible for the
casters to slide. Free release head and foot motors are designed to lower the
mattress by retracting only with gravity, never pulling downwards, which minimizes
pinch points.
ACOUSTICS
LIFTING/LOWERING MECHANISMS
The lift/lower feature will emit a minimal humming sound during operation. This
is normal. During operation, the lift arm wheels make contact with the platform
support of the base. This contact may result in metal on metal or metal on plastic
contact. This applies slight tension on the moving components and resonance is
reduced to a minimum level. If excessive noise or vibration is experienced, reverse
the movement action (up or down) of the base with the remote control. This should
realign the base’s activating mechanisms to the proper operational position. In
normal base operation, the wheels, which allow the bed to maintain its distance
from the wall, will make contact with the steel platform supports of the base creating
a contact noise. When entering, exiting or shifting weight on the base, this contact
noise may be audible as the wheels make contact. This is normal.
MATERIALS
Ergomotion adjustable bases are constructed from various materials including
woods, metals, plastics and fabrics. Tension, pressure or movement applied to
the frame, platform or shroud through general use may create an audible sound.
TOLERANCE
All Ergomotion adjustable foundations, depending on make and model, are
designed and manufactured to perform and function within designated quality
control parameters. Bases are subject to meticulous and rigorous inspections
during the quality control process to ensure bases will operate within these
following: Adjustable foundation is to be operated with a mattress and load. Testing
procedures require lifetime cycle tests with up to 120 kg distributed load. The angle
tolerance of up to 1 ½”.
safety precautions and usage statements
(α°)
(β°)
WARNING
For optimal safety and operation, plug bed base into a surge protector
(not included). The bed base should only be plugged directly into a
grounded wall outlet or surge protector (strongly recommended). Improper
connection of the equipment can result in the risk of electrical shock,
electrical file or faulty operation of this bed base. If the plug does not fit
your outlet, contact a qualified Electrician to install a suitable outlet.
To Next Page
Loading...
