4
DO:
t Plug your adjustable base into a power surge protector.
t Evenly distribute weight when sleeping in a split setup (uneven distribution of
weight can cause the base to lift unevenly).
t Call Customer Service for any technical issues. Do not try to force the base
down (this can damage the motors or frame).
t Use mild soap and water to clean your adjustable base if staining occurs.
t Keep in mind that adjustable bases are recommended to be used with
adjustable friendly mattresses.
t Lower t
tEnter or exit y
t Register your warranty as soon as your adjustable base has been delivered.
DON’T:
tSit on corners/edges of base (this may warp the frame, struts or foam).
tTilt the base on its side (this can damage the legs and/or leg screws).
tStand or jump on the adjustable base at any time (this can damage the
frame and motors).
tDrag the base to move it. Purchase castors if you plan on moving your base
routinely. (Dragging the base could damage the frame, strip the nut/bolts or
break the legs.)
tEnter and exit the adjustable base with the head and/or foot in the
articulated position.
tTinker with or modify base.
tPress down on the head or foot while actuated, this can damage the frame
and motors.
SAVE THESE INSTRUCTIONS.
FCC Compliance:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
To comply with the FCC RF exposure requirements, no
change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the
device exceeding the RF exposure requirement and void
user’s right to operate the device.
Radio Frequency: 2.4 GHz
safety precautions and usage statements
To Next Page
Loading...
