- 3 -
• The operation in these instructions is explained by using the
ErgoPack 726E as an example.
• As to ErgoPack 700, all the points in these instructions
referring to the operation of the sealing head and also all points
referring to the operation of the control box with the motor,
charger and rechargeable batteries are not applicable.
Also at all points in which the movement of the ChainLance is
described by using the joystick, at the ErgoPack 700 you
have to use the crank handle accordingly.
• All points in these instructions referring to the operation of
the sealing head are not applicable as far as the “ErgoPack
700E“ is concerned.
Validity of the operating instructions
To Next Page
Loading...
