-4-
7. 9 Setting welding time 33
7.10 Changing strap coil 34-42
7.11 Setting pallet width 43
8. Operation 44
8.1 Strapping 44-48
8.2 Tensioning and sealing of pallets above 70cm height 49-52
8.3 Sealing control 53
8.4 Tensioning and sealing of pallets below 70cm height 54-56
9. Risks 57-59
10. Service and repair 60
10.1 Cleaning the ChainLance 60
10.2 Replacing the ChainLance 61-65
10.3 Replacing the reversing sledge ´ 66-68
10.4 Replacing individual chain links 69
10.5 Replacing the length adjusting belt 70-71
10.6 Changing the sealing head 72-73
10.7 Changing the control box joystick unit 74-76
10.8 Changing the control box display unit 77-78
10.9 Changing the motor 79-81
10.10 Cleaning/replacing the tension wheel at the sealing head 82-83
10.11 Cleaning/replacing the tooth plate at the sealing head 83
10.12 Replacing the cutter at the sealing head 84
11. Software updates 85-87
12. Spare parts list 88
13. Personal protective equipment 89
14. General safety warnings for power tools 90-93
To Next Page
Loading...
