ErgoPack 726X - Strapping Operations Guide; Basic Strapping Procedure

1. Step
Place the ErgoPack at a
distance of approx. 30 cm
(D) in front of the pallet to
be strapped.
If your system is
equipped with the
optional line laser:
Align the ErgoPack parallel
to the pallet so that the
laser line runs alongside
the pallet edge.
2. Step
Move out the
ChainLance by
pushing the joystick
in „move out“
direction.
The reversing sledge
leads the strap
through and
underneath the
pallet...
8.1 Strapping
Fig. 56
Fig. 57
-44-
8. Operation