Ericsson BDV BS 101 01 - ELU-A and ELU-D

24(48)
Date Rev
DocumentnumberPrepared
Doc respons/Approved Checked Reference
1999-07-15
A
1531-BDV BS 101 05 Uen
INSTALLATION INSTRUCTION
Subject responsible
It is possible to use a variety of converters. However
with the following converters: IC-485SI of ARP DATA-
CON and 232<->485/422 Converter Plus IC-109AE of
Black Box Corp. tests have been successful.
6.12.1 Feature Enabling Control Unit (FECU)
Connecting this plug activates the appropriate applica-
tions and features as ordered depending on the FECU
index number. If no plug is connected, only a limited
Version 4.0 system functionality is available. The indi-
ces 2 to 10 always include the Basic Version 4 func-
tionality (index 1).
For detailed information of the features enabled by the
different FECUs refer to 15534-ASB 150 02 Uen
FACILITY DESCRIPTION GENERAL.
6.13 ELU-A and ELU-D
The relevant boards are:
• ELU-D (ROF 157 5116/_)
• ELU-A (ROF 157 5114/1)
• ELU-A2 (ROF 157 5114/2)
• ELU-D3 (ROF 157 5130/_)
FECU number Functionality Version 4.0
KDU BS 130 07/1 Basic Version 4.0 functionality
KDU BS 130 07/2 + std. digital networking for max.
32 interfaces
KDU BS 130 07/3 + std. digital networking
KDU BS 130 07/4 + full. digital networking for max.
32 interfaces
KDU BS 130 07/5 + full. digital networking
KDU BS 130 07/6 + full. digital networking, 4
interfaces and CTI
KDU BS 130 07/7 + std. digital networking for max.
32 interfaces and CTI
KDU BS 130 07/8 + std. digital networking and CTI
KDU BS 130 07/9 + CTI + full. digital networking for
max. 32 interfaces
KDU BS 130 07/10 + CTI + full. digital networking for
unlimited number of interfaces
1 2
This switch is mount-
ed for future use
3 4
ON
View of the ELU-D3 board
RYS 102 532/2
RYS 102 532/1