81Dialog 3210, 3211 and 3212
Programming and Adjustments
# Press to exit melody mode
Note: If you do not press any key within 30 seconds,
melody mode is automatically cancelled.
Program a new melody, edit or delete a current melody
Program g Press
Press the key for the requested type of call:
If there is a current melody, the melody is played and the last 19
notes or signs are displayed.
Access 1
g Press for internal calls
or
Access 2
g Press for external calls
or
Inquiry
g Press for callback calls
To edit the current melody:
V Move the cursor to the right of the position to be edited
Keep pressed to go to the beginning or to the end.
X Press to erase the note to the left of the cursor
Keep pressed to erase all the notes.
To enter a new melody or new notes, see section “To enter notes”
on page 83.
Program Melody
To Next Page
Loading...
