Installation
BusinessPhone – Dialog 4222 Office / Dialog 3211 & 3212102
Install key panel
Note: Only available for Dialog 4222 Office.
1 Remove the small plastic plate, marked DSS, i.e. with a
screwdriver and connect the cable.
2 Attach the key panel unit.
3 Secure with screws and install stand.
Note: The key panel must be of type DBY 419 01, and it
can only be used with newer exchange versions.
Stand positioning
Dialog4222En.book Page 102 Tuesday, February 4, 2003 12:45 AM
To Next Page
Loading...
