Ericsson Dialog 3211 - Function Codes and Required Data

87BusinessPhone – Dialog 4222 Office / Dialog 3211 & 3212
Settings
Function codes and required data
Note: Accessible functions depend on the programming of
the system; if you require another function please contact
your system administrator. The functions above are the
default functions.
Ringing character:
0 = No ringing.
1 = Ringing.
2 = Delayed ringing (after 10 seconds).
3 = One single ringing signal (muted signal).
4 = One delayed ringing signal (after 10 seconds. Muted signal).
Programming
name
Function
name
Function
code
Associated
number
Ringing
character
NAMECALL
Dial-by-Name 10 Extension number —
SUFFIX DIGIT
Camp-on 11 4 —
Automatic Callback 11 5 —
Answer calls, another
extension
11 6 —
Radio Paging 11 7 —
Intrusion 11 8 —
EXTERNAL LINE
External Line 12 Directory number of line 0 – 4
SUPERVISION
Supervision/Tel.
Attendance
13 Extension number 0 – 4
DEDIC. LINE
Intercom 14 Extension number 0 – 4
BUSY LINE 2
Free On 2nd Access 26 — —
CONFERENCE
Conference 27 — —
IMMED. ANSWER
Immediate Answer 28 — —
EXT. VOICE M.
External Voice Mail 34 — —
HOLD
Hold 35 — —
TRANSFER
Transfer 36 — —
SAVE
Save/Redial 37 — —
READ &
Read & 38 — —
NUMB SECRECY
Number Secrecy 40 — —
ARD REQUEST
Automatic Redial 46 — —
ARD PAUSE
Pause Automatic
Redial
47 — —
Dialog4222En.book Page 87 Tuesday, February 4, 2003 12:45 AM