101BusinessPhone – Dialog 4224 Operator / Dialog 3214
Settings
Ringing volume
volume Press (see display).
You will hear the selected volume (0...lowest volume, 9...highest).
lower Press lower or higher to change the level (see display).
Clear
è Press to finish the procedure.
Note: This programming is not applicable when you have
selected ringing type 2.
Ringing character
character Press (see display).
You will hear the selected character.
next Press to change (see display).
Clear
è Press to finish the procedure.
Personal settings
Setting up the console to meet your requirements.
prog Press (see display).
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
PROGRAMMING VOLUME LEVEL: 4
lower higher return
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
PHONE PROGRAMMING
key short-no. settings ringing
Dialog4224En.book Page 101 Tuesday, August 24, 2004 5:40 PM
To Next Page
Loading...
