Ericsson Dialog 3214 - Function Codes and Required Data

Settings
BusinessPhone – Dialog 4224 Operator / Dialog 321498
Function codes and required data
Note: Accessible functions depend on the programming of
the system; if you require another function please contact
your system administrator. The functions above are the
default functions.
Ringing character:
0 = No ringing.
1 = Ringing.
2 = Delayed ringing (after 10 seconds).
3 = One single ringing signal (muted signal).
4 = One delayed ringing signal (after 10 seconds. Muted signal).
Programming
name
Function
name
Function
code
Associated
number
Ringing
character
NAMECALL Dial-by-Name 10 Extension number —
SUFFIX DIGIT Camp-on 11 4 —
Automatic Callback 11 5 —
Answer calls, another
extension
11 6 —
Radio Paging 11 7 —
Intrusion 11 8 —
EXTERNAL LINE External Line 12 Directory number of line 0 – 4
SUPERVISION Supervision/Tel.
Attendance
13 Extension number 0 – 4
DEDIC. LINE Intercom Line 14 Extension number 0 – 4
BUSY LINE 2 Free On 2nd Access 26 — —
CONFERENCE Conference 27 — —
IMMED. ANSWER Immediate Answer 28 — —
EXT. VOICE M. External Voice Mail 34 — —
HOLD Hold 35 — —
TRANSFER Transfer 36 — —
SAVE Save/Redial 37 — —
READ & Read & 38 — —
NUMB SECRECY Number Secrecy 40 — —
ARD REQUEST Automatic Redial 46 — —
ARD PAUSE Pause Automatic Redial 47 — —
Dialog4224En.book Page 98 Tuesday, August 24, 2004 5:40 PM